PILOT MINI PULVERISERS are suitable to grind all but sticky materials. These machines are highly suitable for flour mills, ayurvedic medicine manufactures, bakeries, chemical pulverising industries etc.
The material to be ground are fed into the chamber ( crushing chamber) from a hopper. The beaters inside the chamber accelerate the material at a very high speed to the toothed liner placed at the upper half of the inner periphery of the chamber. The material is pulverised by impact and shearing. The ground material is discharged through the mesh placed at the lower half of inner periphery of the chamber. Excess air is filtered through a cotton balloon. The mesh can be varied as per the  mesh size of the flour required.

Main body & frame is made of high quality cast iron/M.S. channel frame, liner of high grade steel casting and bearings are lubricated oil (company supplying the machine without oil) Instead of rubber oil seals metal seals are used for avoiding friction & maintenance, which will occur due to the use of rubber seals.

Also supply Pulveriser with Stainless Steel contact parts at the cost of 300% of standard Mini Pulveriser. Also add (S.S) along with model no. for S.S Pulveriser . For example Stainless Steel Pulveriser Model No. 410 is to be mentioned as Model No. 410(S.S). 

Standard Accessories supplied along with the machine- Sieves 4 nos. cotton balloon 1 No., & S.S air filter with nylon.

Output Cap. Kg/Hr

Pilot408(portable)