16. PILOT URULI ROASTER


PILOT URULI ROASTERS are suitable for roasting and mixing grains powders, spices and coffee. Machine consists of an aluminium Uruli with attached stainless steel flame and powder guard, stirrers, speed reduction mechanism, electric motor, trolley, collection tray. Burners, fuel tank with pressure gauge and foot pump for Kerosene firing or LPG burners with accessories (excluding cylinder). If both firing system is required it will cost extra.

Technical Specification (approximate)
 
 
Sl. No Model Power(HP/ph) No. of burners
Kero./LPG		 Capty. of
vessels
Ltr / kg		 Capty. of 
Kerosene
tank (ltr)		 Out put
Kg/hr
(for rice)		 No. of Stirrers
1. URB 10
(Std. model)		 0.25(1 Ph) 1/1 45/10 10 30 3
2. URB 10
(Deluxe)		 0.25(1 Ph) 1/1 45/10 10 30 3
3. URB 25 0.5(3 Ph) 2/1 95/20 20 80 4
4 URB 60 1.5 (3 Ph)  3/2 200/60 30 130 6

back


 

17. ACCESSORIES FOR URULI ROASTER

LPG FIRING SYSTEM consists of burner, needle control valve, copper burner pigtail, Flexible burner pigtail, compact valve adaptor 2 Nos (25.6 mm & 22 mm ) and flexible two bottle connections, tee joint and burner holder.

Sl. No Model of Uruli 
Roaster		 Size of burner No. of burners
1  URB-10 T 22 1
2. URB-25 T 35 1
3. URB-60 M 50 2
KEROSENE FIRING SYSTEM Consists of fuel tank with pressure guage, control valve, foot pumps, burners, iron pipe and flexible pipe. 
Sl. No Model of
Uruli 
Roaster		 Size of burner No. of burners Capacity of
kerosene tank
1. URB- 10 No. 10 1 10
2. URB-25  do 2 20
3. URB-60 do 3 30
         
 NOTE : Slight variations in the cost of kerosene and LPG firing system is not considered as it is negligible.
Additional SS Thermal insulation for Uruli Roaster

High quality glass wool is filled between two SS cylinders and kept around the flame guard reaching upto the top level of the roasting vessel. It helps to reduce heat loss due to radiation.

back


18. S.S. CYLINDRICAL BATCH ROASTER.

Cylindrical Batch Roasters are recommended for roasting spices batch by batch. Roasting drum, heating elements, S.S inner and outer shell of the thermal insulation, motor, reduction gear and control panels are the major components of this equipment. LPG or Electricity can be used as the fuel for heating. This machine also can be supplied according to the customers specification. Rates of the standard machine are as follows.

Technical Specifications

Sl. No

Model of Uruli
Roaster

 Motor (HP) Heater-KW Capacity
kg/batch
1. PCBR 50 1/2 8 50
2. PCBR 100 1 12 100
3. PCBR 200 1 20 200

 NOTE: you may calculate 15 % less for LPG fired roasters.

back


19. Fully Automatic PILOT S.S Cylindrical Continuous  Roaster

This machine is suitable for continuous process and hence can be used for bulk production of dry fried and desiccated grain powder , paddy and spices. Feeding and discharge of the processing material takes place automatically at a pre set condition. Out put will vary according to the nature of material and dryness required. The cylindrical roaster consists of

1. A horizontally mounted stainless steel cylindrical chamber with a spiral on the inner periphery.

2. Burners    3. Feeding Hopper   4. Motor     5. Reduction Gear   

Technical Specifications
Sl. No. Model  Heater
-Kw		 Motor
Power(HP)		 Capacity
Kg/batch		 Size of roasting Chamber LxD  
1. PCRD 50 8 0.25 50-75 53" x 18"  
2. PCRD 120 20 0.5 125-150 72" x 24"  
3. PCRD 300 48 1 300-350 96" x 38"  
Note : You may calculate less 15% for LPG fired roasters. Elevator shown in the picture is not a standard part.

back